WindPal All-in-1

WindPal All-in-1

Product available


With WindPal All-in-1, we want to bring the power of the wind and water to the hands of you. We want you to conquer the outdoors and embark on new adventures knowing that you have back-up in wind and water. WindPal All-in-1 is light to carry along with you and it is easy and safe to use. Just connect your device or gadget with a USB cable. It is made to last in demanding conditions when properly used.

It fits in the bag of any backpacker, camper, hiker or climber who wants to produce their own sustainable personal energy. Explore wherever the trail leads you with WindPal powering your journey!

Get it, bag it in your bag and go for your next adventure using WindPal to power your journey. 



Generator, sails, propeller and water bottle
Max output: 5 W
Voltage: 5 V

USB A female connector, wire lenght 500 mm (20 inch)
IP protection (generator): IP67
Min wind speed: 4 m/s (9 mph)
Max wind speed: 20 m/s (45 mph)
Sails diameter 230 mm (9 inch) and lenght 1,5m (60 inch)
Sails, propeller and generator weight 1,4 kg (3,1 lb)



Wind turbine (sails including upperend attachment)
Water propeller and water bottle
2 x Tent stakes



WindPal All-in-1 is a portable wind and water generator for charging small devices. WindPal All-in-1 uses vertical axis for harness wind and water propeller for water energy.

WindPal All-in-1 is a hybrid of WindPal Kayak and Hiker. The package includes a generator, sails and propeller. 

When you have wind power available you attach the sails to the generator. When you have water power you attach the propeller. As simple as that. 

It is meant to charge small electrical devices (5V) like mobile phones, battery banks, etc. Sails attached charging starts when wind speed reach 4 m/s (9 mph) and maximum allowed wind speed is 20 m/s (45 mph). With propeller the needed speed in water is 3 km/h (2 mph). 

There are three major components in WindPal All-in-1, the generator, sails and propeller. Assembly and disassembly take less than one minute. In rainy conditions it is recommendable to use cover on device you want to charge. WindPal All-in-1 itself is totally waterproof.



For wind: Begin by looking for a place where is wind and you can hook up your WindPal. There shouln't be any obstacles (trees, bushes) between wind and the installation place where you have the WindPal. Best places are open and high places, especially near bodies of water such as lake and seafronts. 

Attach generator and turbine. Place webbing around tree and hook upperend to the webbing. Place tentstakes to cords which are locateded on the bottom of the generator and push tentstakes to the ground. Tighten WindPal by using linerunner in the upper end cord.

Plug in you device USB-wire to WindPal USB-connection. If rain is to be expected, cover your device and USB connection properly (plastic bag, etc.).

For water: Begin by looking for streaming water or a lake or similar. You can use WindPal Kayak both while paddling and left alone in a stream.

Attach generator and propeller. Attach these to ground or tree with tentstakes, when left alone in a stream. Other option is to attach to your kayak, canoe or similar. Place WindPal Kayak in water, so that it doesn't hit any rocks or bottom of water. 

Plug in you device USB-wire to WindPal USB-connection. If rain is to be expected, cover your device and USB connection properly (plastic bag, etc.).



Prices shown include VAT (24 %), which is charged only within EU. Outside EU there may be custom charges depending on the country.


Watch the video what is WindPal all about. YouTube link.


Browse these categories as well: Buy a WindPal, WindPal